AWF Announcements The Dalton Clutch Kit Give Away Contest has begun! A big Thank You to all you guys who have become site supporters!! |
Can-Am Headquarters ...Aurora Wheelers ATV Forum > Supporting Sponsor Forums > Welcome AWF Sponsors > ATV Outfitters > Ricochet Skids - Outlander 800 Install Tips |
| Moderated by: zac41, OSOKILL | Page: 1 2   |
|
||||||||||||||
| Ricochet Skids - Outlander 800 Install Tips - ATV Outfitters - Supporting Sponsor Forums - Can-Am Headquarters ...Aurora Wheelers ATV Forum | ||||||||||||||||
| Author | Post | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||
SSonnentag 
|
First off I want to say a big THANK YOU to ATV Outfitters. The installation went very smoothly, taking only 2.5 hours from start to finish. The trickiest part was figuring out how to get the machine up on end. I didn't have anyone available to help me, so I ran the quad up onto a pair of ramps and then used my leg and back muscles to get it the rest of the way up. The non-Max versions should be a bit easier to lift up due to less leverage/more incline. Be sure you tie off the ATV once you get it up to prevent serious injury or death should it happen to fall down on top of you. I really only have one note to make about the installation process. There are two holes that need to be drilled through the spar frame. DO NOT OVERTIGHTEN THE BOLTS YOU PUT THROUGH THE FRAME! The box frame channel is very easy to collapse with these two bolts. Just snug them up and call it good. Thanks, again, ATV Outfitters!  Now for a few pictures. --ShawnAttachment: Install-1.jpg (Downloaded 1171 times) Last edited on Wed Dec 21st, 2005 05:20 pm by SSonnentag ____________________ 2006 Outlander 800 Max - street legal ITP Wheels, Mudhook XXtremes, PIAA 1100X Lights, Ricochet Skids, Fender Ext, Twist Throttle, Horn, Mirrors, Receiver Hitch |
|||||||||||||||
| ||||||||||||||||
| ||||||||||||||||
SSonnentag
|
A little higher... Attachment: Install-2.jpg (Downloaded 1173 times)
____________________ 2006 Outlander 800 Max - street legal ITP Wheels, Mudhook XXtremes, PIAA 1100X Lights, Ricochet Skids, Fender Ext, Twist Throttle, Horn, Mirrors, Receiver Hitch |
|||||||||||||||
| ||||||||||||||||
| ||||||||||||||||
SSonnentag
|
View of the stock belly: Attachment: Install-3.jpg (Downloaded 1165 times)
____________________ 2006 Outlander 800 Max - street legal ITP Wheels, Mudhook XXtremes, PIAA 1100X Lights, Ricochet Skids, Fender Ext, Twist Throttle, Horn, Mirrors, Receiver Hitch |
|||||||||||||||
| ||||||||||||||||
| ||||||||||||||||
SSonnentag
|
And the new, improved Ricochet belly!   Attachment: Install-4.jpg (Downloaded 1218 times)
____________________ 2006 Outlander 800 Max - street legal ITP Wheels, Mudhook XXtremes, PIAA 1100X Lights, Ricochet Skids, Fender Ext, Twist Throttle, Horn, Mirrors, Receiver Hitch |
|||||||||||||||
| ||||||||||||||||
| ||||||||||||||||
|
coconut 56 Member
|
Looks good!!
____________________ 06 Red Outty Max 800 #154 05 Yellow Outty Max 400 |
|||||||||||||||
| ||||||||||||||||
| ||||||||||||||||
|
outlandish Admin 
|
That looks great! Is the hardware easy to attach and are the bolt holes counter sunk?
____________________
|
|||||||||||||||
| ||||||||||||||||
| ||||||||||||||||
SSonnentag
|
The hardware is all extremely easy to attach. All bolt holes line up perfectly. The holes are not countersunk, but all exposed bolts have rounded allen-type heads, so hanging them up on rocks shouldn't really be an issue. --Shawn
____________________ 2006 Outlander 800 Max - street legal ITP Wheels, Mudhook XXtremes, PIAA 1100X Lights, Ricochet Skids, Fender Ext, Twist Throttle, Horn, Mirrors, Receiver Hitch |
|||||||||||||||
| ||||||||||||||||
| ||||||||||||||||
SSonnentag
|
One last photo from the perspective of a rock.  Attachment: Install-5.jpg (Downloaded 1124 times)
____________________ 2006 Outlander 800 Max - street legal ITP Wheels, Mudhook XXtremes, PIAA 1100X Lights, Ricochet Skids, Fender Ext, Twist Throttle, Horn, Mirrors, Receiver Hitch |
|||||||||||||||
| ||||||||||||||||
| ||||||||||||||||
|
BigBore4x4 Member
|
Looks very good! When drilling into the spar frame did you drill leaving the skids on the machine or did you mark the spot, remove the skids, then drill. 2006 Outlander 800 EFI Yellow 2005 Polaris Sportsman 700 EFI - Sold
____________________ 2006 Outlander 800 H.O. EFI - Yellow Ricochet Skids and A-arm Guards Team Outty 800 Member #32 2006 Ford F-150 XLT 5.4L |
|||||||||||||||
| ||||||||||||||||
| ||||||||||||||||
SSonnentag
|
I drilled with the skids on the frame. The instructions state to do it this way and I can't see any reason not to. --Shawn
____________________ 2006 Outlander 800 Max - street legal ITP Wheels, Mudhook XXtremes, PIAA 1100X Lights, Ricochet Skids, Fender Ext, Twist Throttle, Horn, Mirrors, Receiver Hitch |
|||||||||||||||
| ||||||||||||||||
| ||||||||||||||||
|
Muddbelly Member 
|
Nice poste. Those pictures are great.  ....... Wish I new how to do that picture posting thing. lol Do you suppose there is a way to fasten the center skid to the spar frame without drilling the frame? I'll check into that this weekend.
____________________ Outlander 800XT Camo 14" ITP C-Series w/ 27" Mudlite XTR's Skids & Guards- Rack Extensions- Heated Thumb & Grips- Custom Gun Scabbard Mount- Fender Mud Guards- Custom Hand Guards- 1 1/2" Receiver- GPS- Tamarack Quad Trunk-Crutchfield Stage 2 Shocks Front and Rear- Inner and Outter Rear Aluminum CV Boot Protectors- Custom Stainless Heat Guards Around Trans.- 100W Reverse and 110w/135w Headlamps- More on the way! |
|||||||||||||||
| ||||||||||||||||
| ||||||||||||||||
|
brewster Member
|
great post and great pic's but like muddbelly i would like to know if anyone has installed them without drilling the frame.i'm thinking of trying some type of bracket along the curved up edges.anyone have any other thoughts? i would just bolt them together but i would have to space them down to clear the nuts on the bolts.
____________________ 06 outty 800 red xt bumpers,hand guard,a-arm protectors, full skids,55w headlites #38 |
|||||||||||||||
| ||||||||||||||||
| ||||||||||||||||
roaddog
|
Got mine today. I to am trying to think of a different way to bolt on without drilling frame. May have to go to hardware store and look for parts.
____________________ 2006 Viper Red 800 H.O. V-Twin EFI XT #206 Team Outty 800 Member #12 Build Date 09-2005 50" Moose County Plow & Fender Extentions BRP Heated Grips & Thumb Throttle Vip-air Windshield w/ 20 1/4" shield Silverstar Ultra & ext. 55 Watt Xenon Lights Ricochet Skid Plate,Front A-arms 27" Mudlite XTR's on SS 108 rims 4-Crutchfield stage 2 shocks |
|||||||||||||||
| ||||||||||||||||
| ||||||||||||||||
|
brewster Member
|
let us know if you come up with somthing and i will do the same.thanks
____________________ 06 outty 800 red xt bumpers,hand guard,a-arm protectors, full skids,55w headlites #38 |
|||||||||||||||
| ||||||||||||||||
| ||||||||||||||||
|
BigBore4x4 Member
|
I spoke with Don at Utah Cycle concerning the mounting of the skids specifically the drilling of the two holes into the spar frame. He told me that they racked their brains trying to come up different ways to mount the skids even making several different types of mounting brackets. Ultimately, he didn't like any of them and decided to drill two small holes (11/32) to simplify the install and to give them a clean look. He also stated that the two holes that have to be drilled would not affect the integrity of the spar frame. I also had my reservations about drilling until I spoke with him, not to mention my BRP plate install (talk about a pain in the butt to mount). If you have any questions give him a call he's a super nice guy. Happy Holidays Everyone!! 2006 Outlander 800 H.O. EFI - Yellow Richochet Skids & A-Arm Guards 2005 Polaris Sportsman 700 EFI - Sold Attachment: AuroraWheelers.doc (Downloaded 55 times)
____________________ 2006 Outlander 800 H.O. EFI - Yellow Ricochet Skids and A-arm Guards Team Outty 800 Member #32 2006 Ford F-150 XLT 5.4L |
|||||||||||||||
| ||||||||||||||||
| ||||||||||||||||
|
coconut 56 Member
|
I had the same concerns when installing the Perfex skids on my 400 Max.I contacted Bomber Tech over at the Frontier and he assured me it would not compromise the frame integrity,he has installed a lot of them for his customers with no problems.What I did was use fender washers on top where the nut goes to spread the load when tightening the bolt and nut.I intend to do the same on the 800 skids.
____________________ 06 Red Outty Max 800 #154 05 Yellow Outty Max 400 |
|||||||||||||||
| ||||||||||||||||
| ||||||||||||||||
|
brewster Member
|
are you guy's using anything to seal the hole against water or rusting? don't know if i should be concerned but just a thought. i get paranoid about these thing's. i just don't know if water will puddle inside the frame.i will take a closer look tomorrow.
____________________ 06 outty 800 red xt bumpers,hand guard,a-arm protectors, full skids,55w headlites #38 |
|||||||||||||||
| ||||||||||||||||
| ||||||||||||||||
roaddog
|
brewster wrote: are you guy's using anything to seal the hole against water or rusting? don't know if i should be concerned but just a thought. i get paranoid about these thing's. i just don't know if water will puddle inside the frame.i will take a closer look tomorrow.Didn't even think of water getting in. It would leak water unless you used som type of sealant. More reason to find another way to mount without drilling!
____________________ 2006 Viper Red 800 H.O. V-Twin EFI XT #206 Team Outty 800 Member #12 Build Date 09-2005 50" Moose County Plow & Fender Extentions BRP Heated Grips & Thumb Throttle Vip-air Windshield w/ 20 1/4" shield Silverstar Ultra & ext. 55 Watt Xenon Lights Ricochet Skid Plate,Front A-arms 27" Mudlite XTR's on SS 108 rims 4-Crutchfield stage 2 shocks |
|||||||||||||||
| ||||||||||||||||
| ||||||||||||||||
|
BigBore4x4 Member
|
There is two openings in the spar frame underneath the hitch for water to run out of. So water and moisture in the frame should not be a problem. As far as rust is concerned I was thinking of using white lithium grease . 2006 Outlander 800 H.O. EFI - Yellow Ricochet Skids & A-Arm Guards 2005 Polaris Sportsman 700 EFI - Sold
____________________ 2006 Outlander 800 H.O. EFI - Yellow Ricochet Skids and A-arm Guards Team Outty 800 Member #32 2006 Ford F-150 XLT 5.4L |
|||||||||||||||
| ||||||||||||||||
| ||||||||||||||||
|
brewster Member
|
yea i was just looking at it and saw the two holes for water to escape. i guess if drilling is the only way i will just use some rustolium stop rust after drilling the holes for the drilled edges.maby some roofing membrane to keep them dry with over sized ss washers.im also contemplating two strips of aluminum on the topside and just riveting the plates together. if you needed to separate them you can just drill out the rivet's. Last edited on Sat Dec 24th, 2005 03:11 pm by brewster ____________________ 06 outty 800 red xt bumpers,hand guard,a-arm protectors, full skids,55w headlites #38 |
|||||||||||||||
| ||||||||||||||||
| ||||||||||||||||
|
brewster Member
|
well i decided to go with the riveting method. went to depot and got a 3/4 by 1/8 strip of aluminum cut it into 5" pieces and got some 3/16 ths aluminum rivets med size.put 3 strips at each end of the center plate 4 rivets per strip.so far so good. i also put foam strip along the frame like brp does but wider. to stop any possible rattles or rubbing.i know it will be harder to remove but i drilled a rivet to test it and it was a piece of cake. i just hope it stays up after a hard hit, in which case i can still drill the frame if need be.
____________________ 06 outty 800 red xt bumpers,hand guard,a-arm protectors, full skids,55w headlites #38 |
|||||||||||||||
| ||||||||||||||||
| ||||||||||||||||
roaddog
|
brewster wrote: well i decided to go with the riveting method. went to depot and got a 3/4 by 1/8 strip of aluminum cut it into 5" pieces and got some 3/16 ths aluminum rivets med size.put 3 strips at each end of the center plate 4 rivets per strip.so far so good. i also put foam strip along the frame like brp does but wider. to stop any possible rattles or rubbing.i know it will be harder to remove but i drilled a rivet to test it and it was a piece of cake. i just hope it stays up after a hard hit, in which case i can still drill the frame if need be.snap some photos of it! I was thinking of of makeing 2 c shape brackets ( [ ) and bolt them on each side of the plate by clamping it around the frame. The foam sounds likea good idea, i think i will look for some rubber stripping after the holidays.
____________________ 2006 Viper Red 800 H.O. V-Twin EFI XT #206 Team Outty 800 Member #12 Build Date 09-2005 50" Moose County Plow & Fender Extentions BRP Heated Grips & Thumb Throttle Vip-air Windshield w/ 20 1/4" shield Silverstar Ultra & ext. 55 Watt Xenon Lights Ricochet Skid Plate,Front A-arms 27" Mudlite XTR's on SS 108 rims 4-Crutchfield stage 2 shocks |
|||||||||||||||
| ||||||||||||||||
| ||||||||||||
